Washing machine door-lock repair in Ahmadli

The customer reported that the door physically closed, but the appliance did not begin washing after the start command and displayed a door error. The handle, latch alignment and door seal were checked first for a mechanical obstruction.

The interlock was removed and tested with a multimeter, while its connector and wiring path were inspected. Its internal contact was responding intermittently. A model-compatible lock was installed, the connector was secured and latch alignment was adjusted.

Repeated start, pause, drain and programme-end tests were completed. The door locked correctly each time, the programme started without delay and the door released only after safe draining.

This Ahmadli washing-machine repair shows why the latch, interlock and wiring should be measured before an electronic control-board repair is considered.